What is the CP-376TR, and what is it primarily used for?

The CP-376TR is a ratcheting network crimper for 4P, 6P, and 8P modular connectors. It combines cable cutting, stripping, and crimping and supports common connectors including RJ45, RJ11, RJ12, and RJ22.

Which users or work situations is the CP-376TR suitable for?

It is suitable for network cabling, telephone wiring, low-voltage engineering, and equipment maintenance. Although it handles several modular connectors, verify the connector specification, cable type, and conductor arrangement before crimping.

What are the features and benefits of the CP-376TR's ratcheting leverage and complete crimp?

The ratchet applies force progressively through the stroke, helping seat the connector fully and maintain consistency. If a connector is positioned incorrectly, use the release mechanism rather than forcing or twisting the tool.

What are the features and benefits of the CP-376TR's three-in-one cutting, stripping, and crimping functions?

One tool can cut and strip round UTP/STP twisted-pair cable and crimp modular connectors, reducing tool changes during installation. Strip carefully to avoid damaging the insulation on the individual conductors.

What are the basic steps for crimping an RJ45 connector with the CP-376TR?

Arrange the conductors according to the selected standard, flatten and trim them evenly, insert them fully into a compatible RJ45 connector, and complete the full ratchet stroke in the 8P die. Test wire sequence and continuity with a network tester afterward.

Which connectors can the CP-376TR crimp?

Official information lists 8P8C RJ45, 6P-series RJ11/RJ12, and 4P RJ22 modular connectors. Compatibility with pass-through connectors, special shielded housings, or specific brands must be confirmed separately.

What precautions apply when cutting and crimping with the CP-376TR?

The blades and die area can pinch or cut fingers, so keep hands out of the mechanism. Do not use the tool on energized circuits and confirm that the cable is disconnected from power and equipment before work.

How should the CP-376TR be maintained and its blade replaced?

Remove cable-jacket debris after use, lightly lubricate moving joints, and keep the dies clean. The official replacement blade is 5PK-376C-BLADE; replace it according to specification when the edge becomes dull or damaged.

How should I choose between the CP-376TR and a dedicated RJ45 crimper?

A dedicated tool may be simpler for high-volume work with one RJ45 connector type. The CP-376TR supports 4P, 6P, and 8P connectors and is suitable for users who work on both network and telephone cabling.

Which cable and connector conditions should be confirmed before purchasing the CP-376TR?

Check the connector's P/C configuration, whether it is shielded or pass-through, conductor size, and cable construction. Supporting multiple modular connectors does not mean every special connector is directly compatible.

CP-376TR

Global
Taiwan
China

4P/6P/8P Telecom Crimping Tool (190mm)

Name: 4P/6P/8P Telecom Crimping Tool (190mm)
Brand: Pro'sKit
SKU: CP-376TR

8P / 6P / 4P
Accurate
Practical
Comfortable
Convenient

5G Station Network Computer-Laptop Electronic Production line Enterprise Network Setup Home DIY Phone Repair Student CRIMPER Enterprise-Network-Solution Fiber network Home-Network-Solution Network-Crimper ProfessionalModularCrimping 網路網路居家不求人壓著

I would like to make a query

Features
Videos
FAQ
Dealer
Support

CP-376TR

Application: for 4/6/8P modular connector
Stripping twisted pair wire & flat wire
Dual color design handle
Ratchet force-saving system
Replacement blade (Blade model No.:5PK-376C-BLADE)

Material	Handle	HRC	Application	Replacement blade	OAL. (mm)	Individual packing
S45C	Black: T.P.R Green: PP	45˚±3˚	8P8C/RJ45, 6P2C/6P4C/6P6C RJ11/ RJ12 modular plugs, RJ22 4P2C/4P4C handset modular plugs	5PK-376C-BLADE (6pcs/pack)	190	Blister card

What is the CP-376TR, and what is it primarily used for?

The CP-376TR is a ratcheting network crimper for 4P, 6P, and 8P modular connectors. It combines cable cutting, stripping, and crimping and supports common connectors including RJ45, RJ11, RJ12, and RJ22.
Which users or work situations is the CP-376TR suitable for?

It is suitable for network cabling, telephone wiring, low-voltage engineering, and equipment maintenance. Although it handles several modular connectors, verify the connector specification, cable type, and conductor arrangement before crimping.
What are the features and benefits of the CP-376TR's ratcheting leverage and complete crimp?

The ratchet applies force progressively through the stroke, helping seat the connector fully and maintain consistency. If a connector is positioned incorrectly, use the release mechanism rather than forcing or twisting the tool.
What are the features and benefits of the CP-376TR's three-in-one cutting, stripping, and crimping functions?

One tool can cut and strip round UTP/STP twisted-pair cable and crimp modular connectors, reducing tool changes during installation. Strip carefully to avoid damaging the insulation on the individual conductors.
What are the basic steps for crimping an RJ45 connector with the CP-376TR?

Arrange the conductors according to the selected standard, flatten and trim them evenly, insert them fully into a compatible RJ45 connector, and complete the full ratchet stroke in the 8P die. Test wire sequence and continuity with a network tester afterward.
Which connectors can the CP-376TR crimp?

Official information lists 8P8C RJ45, 6P-series RJ11/RJ12, and 4P RJ22 modular connectors. Compatibility with pass-through connectors, special shielded housings, or specific brands must be confirmed separately.
What precautions apply when cutting and crimping with the CP-376TR?

The blades and die area can pinch or cut fingers, so keep hands out of the mechanism. Do not use the tool on energized circuits and confirm that the cable is disconnected from power and equipment before work.
How should the CP-376TR be maintained and its blade replaced?

Remove cable-jacket debris after use, lightly lubricate moving joints, and keep the dies clean. The official replacement blade is 5PK-376C-BLADE; replace it according to specification when the edge becomes dull or damaged.
How should I choose between the CP-376TR and a dedicated RJ45 crimper?

A dedicated tool may be simpler for high-volume work with one RJ45 connector type. The CP-376TR supports 4P, 6P, and 8P connectors and is suitable for users who work on both network and telephone cabling.
Which cable and connector conditions should be confirmed before purchasing the CP-376TR?

Check the connector's P/C configuration, whether it is shielded or pass-through, conductor size, and cable construction. Supporting multiple modular connectors does not mean every special connector is directly compatible.

Shipping Instructions

Ship From	TW
Packing	Blister Card
CTN	45
N.W.	16 Kg
G.W.	17.5 Kg
CUFT	1.55
M³	0.04
MOQ	45