What is the DK-2043, and what is it primarily used for?

The DK-2043 is a serrated shear designed for Kevlar aramid yarn in the outer layer of fiber-optic cable. It uses high-carbon steel blades with HRC 60-62 hardness and large TPR handles to reduce fiber slipping during cutting.

Which users or work situations is the DK-2043 suitable for?

It is suitable for fiber cabling, telecommunications installation, and cable fabrication personnel trimming aramid strength fibers in optical cable. It is not a glass-fiber cleaver and should not cut hard metal.

What are the features and benefits of the DK-2043's non-slip serrated blades?

Fine serrations grip flexible Kevlar fibers, reducing forward sliding and producing a cleaner cut. Place the fibers in the effective blade area and avoid cutting only with the tips.

What are the features and benefits of the DK-2043's high-hardness blades and large handles?

The high-carbon steel blades have HRC 60-62 hardness, with a stated edge microhardness of HV1200. The large TPR handles provide a stable grip for repetitive fiber installation.

What is the correct method for cutting Kevlar aramid yarn with the DK-2043?

Gather the aramid fibers into a bundle, straighten them, place them in the serrated area near the blade pivot, and cut through once with steady pressure. Do not pull and repeatedly nibble the fibers, which can spread them apart.

Can the DK-2043 cut glass fiber, copper wire, or steel wire?

This is not recommended. It is designed for Kevlar aramid fiber. Use a dedicated cleaver for glass fiber and a suitable wire cutter for metal conductors. Cutting hard material can chip or dull the blades.

What safety precautions apply when using the DK-2043?

The blades are very sharp. Cut away from fingers, wear safety glasses, and collect cut fiber and aramid debris immediately. Do not pry, twist, or cut energized conductors with the shears.

How should the DK-2043 be cleaned and protected against corrosion?

Remove fibers and adhesive after use, wipe the blades with a dry cloth, apply a thin rust-preventive oil if needed, and store them closed. Avoid strong acids, alkalis, humidity, and drops. Do not grind damaged serrations flat yourself.

How does the DK-2043 differ from ordinary scissors?

Smooth ordinary blades tend to push Kevlar away or leave frayed edges. The DK-2043's serrations and high hardness are designed specifically for aramid fibers. Dedicated shears may not be necessary for ordinary paper or fabric.

Which installation requirements should be confirmed before purchasing the DK-2043?

Confirm that the main material is Kevlar aramid yarn in optical cable rather than glass fiber, steel armor, or copper wire. For high-volume work, also evaluate handle size, backup shears, and field-maintenance methods.

DK-2043

Global
Taiwan
China

Fiber Optic Kevlar Cutter

Name: Fiber Optic Kevlar Cutter
Brand: Pro'sKit
SKU: DK-2043

· Blades made of high carbon alloy steel with vanadium and molybdenum HRC60-62, cutting
edge hardness HV1200
· Handles made of thermo plastic elastomer
· Extended tang for durability
· Serrated blade for gripping materials
· Specially designed for cutting kevlar materials

Enterprise Network Setup Home DIY Student Fiber network Fiber-Tools

I would like to make a query

Features
FAQ
Dealer
Support

·  Blades made of high carbon alloy steel with vanadium and molybdenum HRC60-62, cutting
   edge hardness HV1200
·  Handles made of thermo plastic elastomer
·  Extended tang for durability
·  Serrated blade for gripping materials
·  Specially designed for cutting kevlar materials

Hardness (Cutting edge)	handle	Individual Packing
HV1200	TPR	Blister Card

What is the DK-2043, and what is it primarily used for?

The DK-2043 is a serrated shear designed for Kevlar aramid yarn in the outer layer of fiber-optic cable. It uses high-carbon steel blades with HRC 60-62 hardness and large TPR handles to reduce fiber slipping during cutting.
Which users or work situations is the DK-2043 suitable for?

It is suitable for fiber cabling, telecommunications installation, and cable fabrication personnel trimming aramid strength fibers in optical cable. It is not a glass-fiber cleaver and should not cut hard metal.
What are the features and benefits of the DK-2043's non-slip serrated blades?

Fine serrations grip flexible Kevlar fibers, reducing forward sliding and producing a cleaner cut. Place the fibers in the effective blade area and avoid cutting only with the tips.
What are the features and benefits of the DK-2043's high-hardness blades and large handles?

The high-carbon steel blades have HRC 60-62 hardness, with a stated edge microhardness of HV1200. The large TPR handles provide a stable grip for repetitive fiber installation.
What is the correct method for cutting Kevlar aramid yarn with the DK-2043?

Gather the aramid fibers into a bundle, straighten them, place them in the serrated area near the blade pivot, and cut through once with steady pressure. Do not pull and repeatedly nibble the fibers, which can spread them apart.
Can the DK-2043 cut glass fiber, copper wire, or steel wire?

This is not recommended. It is designed for Kevlar aramid fiber. Use a dedicated cleaver for glass fiber and a suitable wire cutter for metal conductors. Cutting hard material can chip or dull the blades.
What safety precautions apply when using the DK-2043?

The blades are very sharp. Cut away from fingers, wear safety glasses, and collect cut fiber and aramid debris immediately. Do not pry, twist, or cut energized conductors with the shears.
How should the DK-2043 be cleaned and protected against corrosion?

Remove fibers and adhesive after use, wipe the blades with a dry cloth, apply a thin rust-preventive oil if needed, and store them closed. Avoid strong acids, alkalis, humidity, and drops. Do not grind damaged serrations flat yourself.
How does the DK-2043 differ from ordinary scissors?

Smooth ordinary blades tend to push Kevlar away or leave frayed edges. The DK-2043's serrations and high hardness are designed specifically for aramid fibers. Dedicated shears may not be necessary for ordinary paper or fabric.
Which installation requirements should be confirmed before purchasing the DK-2043?

Confirm that the main material is Kevlar aramid yarn in optical cable rather than glass fiber, steel armor, or copper wire. For high-volume work, also evaluate handle size, backup shears, and field-maintenance methods.

Shipping Instructions

Ship From	TW
Packing	Blister Card
CTN	72
N.W.	7 Kg
G.W.	8 Kg
CUFT	1.38
M³	0.04
MOQ	72