What is the MT-5705, and what is it primarily used for?

The MT-5705 is a solar-panel power tester that measures up to 2000 W, 150 V DC, and 45 A and displays key parameters including Pmax, Vmp, Imp, Voc, and Isc. It provides automatic and manual test modes.

Which users or work situations is the MT-5705 suitable for?

It is suitable for solar-module installation, maintenance, acceptance testing, fault comparison, and field power-performance checks. It can quickly compare maximum power and open-/short-circuit parameters among modules or under different sunlight conditions.

What are the features and benefits of interpreting Pmax, Vmp, and Imp with the MT-5705?

Pmax is the maximum output power under the test conditions. Vmp and Imp are the voltage and current at the maximum power point. These values can be compared with the module nameplate and other modules from the same batch, but they change with irradiance and temperature.

What are the features and benefits of interpreting Voc and Isc with the MT-5705?

Voc is open-circuit voltage and Isc is short-circuit current. They help identify possible module or wiring abnormalities quickly. Short-circuit current testing involves high current and must be performed according to the instrument procedure and rated range.

What are the key points regarding the MT-5705's 2000 W/150 V/45 A measurement limits?

The open-circuit voltage, short-circuit current, and power of the module or array must all remain below the instrument limits with an appropriate safety margin. Do not connect a source after checking only one parameter.

What are the key operating points for the MT-5705's automatic and manual modes?

Automatic mode is suitable for a quick sweep to obtain the maximum power point. Manual mode allows repeated tests as needed, but official instructions require an interval of at least approximately 30 seconds to reduce overheating or unstable readings.

What are the key points for using the MC4 and alligator-clip test leads with the MT-5705?

Use the MC4 leads for compatible module connectors and the alligator clips for other specified terminals. Confirm polarity, connector locking, and cable ratings before connection. Do not reverse polarity or connect and disconnect a loaded circuit with a loose connection.

What DC and overtemperature safety precautions apply when using the MT-5705?

Solar modules continue generating under sunlight. Wear appropriate protection and prevent short circuits during operation. The instrument stops testing above approximately 60°C; move it to a ventilated shaded location and allow it to cool.

How should the MT-5705 terminals and housing be maintained?

Wipe the housing after use and inspect the MC4 connectors and test leads for burning, looseness, or damaged insulation. Keep the ports dry. Use the protective case and shoulder strap to reduce impact during transport.

What should I consider when choosing between the MT-5705 power tester and a multimeter?

A multimeter measures voltage or current separately. The MT-5705 sweeps and displays parameters related to maximum solar power together. For long-term data logging or certified complete I-V curves, more specialized equipment is still required.

New

MT-5705

Global
Taiwan
China

Solar MPPT Power Meter

MT-5705 Key Features
1. 2000W High-Power Testing
Measures up to 2000W, 150V DC and 45A.

2. 5-in-1 Display
Shows Pmax, Vmp, Imp, Voc and Isc on one screen.
Testers can quickly determine the power generation efficiency and abnormal conditions of solar panels without having to repeatedly switch between screens.

3. AUTO / MANUAL Modes
Two test modes for fast and flexible operation.

4. Reverse Polarity Protection
Protects the meter from incorrect cable connection.

5. Over-Temperature Protection
Stops testing automatically when the temperature exceeds 60°C.

6. MC4 Test Leads Included
Connects directly to standard solar panel connectors.

7. Alligator Clip Leads Included
Suitable for terminals, exposed wires and flexible testing.

8. MC4 Connector Wrenches
For installing and removing MC4 and MC4-EVO2 connectors.

9. Compact and Durable
Lightweight ABS housing for easy on-site use.

10. Easy to Carry
Includes a carrying strap and storage pouch.

2000W Solar Power Testing
5 Key Parameters on One Screen
AUTO and MANUAL Test Modes
Reverse Polarity and Over-Temperature Protection
Complete MC4 Testing Accessories Included

I would like to make a query

Features
Videos
FAQ
Downloads
Dealer
Support

What is the MT-5705, and what is it primarily used for?

The MT-5705 is a solar-panel power tester that measures up to 2000 W, 150 V DC, and 45 A and displays key parameters including Pmax, Vmp, Imp, Voc, and Isc. It provides automatic and manual test modes.
Which users or work situations is the MT-5705 suitable for?

It is suitable for solar-module installation, maintenance, acceptance testing, fault comparison, and field power-performance checks. It can quickly compare maximum power and open-/short-circuit parameters among modules or under different sunlight conditions.
What are the features and benefits of interpreting Pmax, Vmp, and Imp with the MT-5705?

Pmax is the maximum output power under the test conditions. Vmp and Imp are the voltage and current at the maximum power point. These values can be compared with the module nameplate and other modules from the same batch, but they change with irradiance and temperature.
What are the features and benefits of interpreting Voc and Isc with the MT-5705?

Voc is open-circuit voltage and Isc is short-circuit current. They help identify possible module or wiring abnormalities quickly. Short-circuit current testing involves high current and must be performed according to the instrument procedure and rated range.
What are the key points regarding the MT-5705's 2000 W/150 V/45 A measurement limits?

The open-circuit voltage, short-circuit current, and power of the module or array must all remain below the instrument limits with an appropriate safety margin. Do not connect a source after checking only one parameter.
What are the key operating points for the MT-5705's automatic and manual modes?

Automatic mode is suitable for a quick sweep to obtain the maximum power point. Manual mode allows repeated tests as needed, but official instructions require an interval of at least approximately 30 seconds to reduce overheating or unstable readings.
What are the key points for using the MC4 and alligator-clip test leads with the MT-5705?

Use the MC4 leads for compatible module connectors and the alligator clips for other specified terminals. Confirm polarity, connector locking, and cable ratings before connection. Do not reverse polarity or connect and disconnect a loaded circuit with a loose connection.
What DC and overtemperature safety precautions apply when using the MT-5705?

Solar modules continue generating under sunlight. Wear appropriate protection and prevent short circuits during operation. The instrument stops testing above approximately 60°C; move it to a ventilated shaded location and allow it to cool.
How should the MT-5705 terminals and housing be maintained?

Wipe the housing after use and inspect the MC4 connectors and test leads for burning, looseness, or damaged insulation. Keep the ports dry. Use the protective case and shoulder strap to reduce impact during transport.
What should I consider when choosing between the MT-5705 power tester and a multimeter?

A multimeter measures voltage or current separately. The MT-5705 sweeps and displays parameters related to maximum solar power together. For long-term data logging or certified complete I-V curves, more specialized equipment is still required.

MT_5705.pdf (Multi Language)	Manual	Download

Shipping Instructions

Ship From	SH
Packing	Industrial Box
CTN	32
N.W.	16.5 Kg
G.W.	17.5 Kg
CUFT	2.2
M³	0.06
MOQ	32