What is the MT-7615, and what is it primarily used for?

It is a fiber/network test tool integrating an optical power meter, network wire mapping, a 15 mW visual fault locator, and LED illumination.

Which users or work situations is the MT-7615 suitable for?

The MT-7615 is suitable for fiber cabling, telecommunications and enterprise-network installation, data-center maintenance, and technicians who need to check both optical power and network cables. Follow the product manual, site conditions, and operating procedures.

What are the features and benefits of the MT-7615's 10 common wavelengths and dB, dBm, nW, µW, and mW display units?

The 10 common wavelengths and multiple units allow measurement to be matched to the fiber system and results to be interpreted as absolute power or relative loss. Use the correct settings and applicable range; do not judge results from one function alone.

What are the features and benefits of the MT-7615's 500-record storage and self-calibration?

Storage for 500 records supports retention of field test results, while self-calibration supports reference setting and calibration according to work requirements. These features improve efficiency, stability, and field interpretation.

What is the correct basic operating method for the MT-7615?

Clean the fiber end face and select the correct wavelength before connecting to the optical-power port. Use the respective interfaces for network-cable testing and the visual fault locator.

What important specifications or compatibility limitations apply to the MT-7615?

It supports 850/980/1270/1300/1310/1490/1550/1577/1625/1650 nm, network wire mapping up to 600 m, a built-in lithium battery, and USB charging.

What safety precautions apply when using the MT-7615?

The visual fault locator is a laser source. Never look into a fiber end face or direct the beam toward anyone's eyes. Confirm the connector type and equipment operating status before connection.

How should the MT-7615 be cleaned and maintained after use?

Clean fiber end faces and adapters before and after use, replace the dust caps, and avoid oil, dust, drops, and prolonged deep discharge of the battery.

How should I choose between the MT-7615 and similar tools?

The MT-7615 is suitable for integrated testing that requires a 15 mW visual fault locator. If a higher output is required, compare it with the MT-7616.

Which points should be confirmed before purchasing the MT-7615?

Confirm fiber-connector adapter requirements, wavelength range, visual-fault-locator output, and whether the included accessories match the field system.

MT-7615

Global
Taiwan
China

4 in 1 fiber Optical Power Multimeter

Name: 4 in 1 fiber Optical Power Multimeter
Brand: Pro'sKit
SKU: MT-7615

4 in 1, 15mW Output
Self Calibration
Rechargeable Li-ion Battery
500 Data Storage
Cable Test

5G Station Network Computer-Laptop Electronic Production line Enterprise Network Setup Home DIY Phone Repair 5G Enterprise-Network-Solution Fiber network Fiber-Multimeter Home-Network-Solution NetworkFiberTest 網路光纖測試

I would like to make a query

Features
Videos
FAQ
Downloads
Dealer
Support

CE Complied.

4 in 1, including Power Meter, Lan Cable Tester, Visual Fault Locator & LED Flashlight.

Power Meter:

Supports 10 wavelength, 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm.

Measurement units: dB, dBm, nW, mW & uW.

Other Functions: Wave ID function, wavelength memory, self-calibration & REF value setting.

Lan Cable Tester:

Pin to Pin cable map indicator.

Max. measuring length 600m.

Visual Fault Locator:

Easy to locate the breakpoint & bad connections in fiber optic cables.

Both continuous and flashing modes available.

LED Flashlight:

Supports extra illumination in dark working condition.

More Functions:

15mW output power.

Equipped with 3.7V/450mAh Li-ion battery, working hours > 50 hours (only OPM).

Micro USB rechargeable design.

Supports 500 data storage.

4 IN 1

Power Meter	850/980/1270/1300/1310/1490/1550/1577/1625/1650nm Measurements in dB, dBm, nW, mW & uW
Cable Tester	Max. length 600m
Visual Fault Locator	Continuous & flashing modes
LED Flashlight	Dark area support

MT-7615&MT-7616 HOW TO USE？
What is the MT-7615, and what is it primarily used for?

It is a fiber/network test tool integrating an optical power meter, network wire mapping, a 15 mW visual fault locator, and LED illumination.
Which users or work situations is the MT-7615 suitable for?

The MT-7615 is suitable for fiber cabling, telecommunications and enterprise-network installation, data-center maintenance, and technicians who need to check both optical power and network cables. Follow the product manual, site conditions, and operating procedures.
What are the features and benefits of the MT-7615's 10 common wavelengths and dB, dBm, nW, µW, and mW display units?

The 10 common wavelengths and multiple units allow measurement to be matched to the fiber system and results to be interpreted as absolute power or relative loss. Use the correct settings and applicable range; do not judge results from one function alone.
What are the features and benefits of the MT-7615's 500-record storage and self-calibration?

Storage for 500 records supports retention of field test results, while self-calibration supports reference setting and calibration according to work requirements. These features improve efficiency, stability, and field interpretation.
What is the correct basic operating method for the MT-7615?

Clean the fiber end face and select the correct wavelength before connecting to the optical-power port. Use the respective interfaces for network-cable testing and the visual fault locator.
What important specifications or compatibility limitations apply to the MT-7615?

It supports 850/980/1270/1300/1310/1490/1550/1577/1625/1650 nm, network wire mapping up to 600 m, a built-in lithium battery, and USB charging.
What safety precautions apply when using the MT-7615?

The visual fault locator is a laser source. Never look into a fiber end face or direct the beam toward anyone's eyes. Confirm the connector type and equipment operating status before connection.
How should the MT-7615 be cleaned and maintained after use?

Clean fiber end faces and adapters before and after use, replace the dust caps, and avoid oil, dust, drops, and prolonged deep discharge of the battery.
How should I choose between the MT-7615 and similar tools?

The MT-7615 is suitable for integrated testing that requires a 15 mW visual fault locator. If a higher output is required, compare it with the MT-7616.
Which points should be confirmed before purchasing the MT-7615?

Confirm fiber-connector adapter requirements, wavelength range, visual-fault-locator output, and whether the included accessories match the field system.

MANUAL_MT_7615_7616_TW.pdf (Multi Language)	Manual	Download
MT7615_16CN.pdf (Multi Language)	Manual	Download
MT7615_16CN_EN.pdf (Multi Language)	Manual	Download
MT7615_16EN.pdf (Multi Language)	Manual	Download

Shipping Instructions

Ship From	SH
Packing	Color Box
CTN	96
N.W.	13.8 Kg
G.W.	14.5 Kg
CUFT	1.45
M³	0.04
MOQ	96