PK-2035-WD
- Global
- Taiwan
- China
Pro Solar Panel MC4 Crimping Tool Kit
All models include the CP-388 Pro Solar Panel Crimper, CP-248 Solar Automatic Cable Stripper, SR-V206 VDE 1000V Insulated Cable Cutter, SD-810-P2 VDE Insulated Screwdriver, 9HW-S5P02 Solar Connector Wrench Set, and HW-122M Folding Type Hex Key Set. Together, these tools support solar cable preparation, connector installation, and equipment fastening.
The PK-2035 and PK-2035M also include the 9CP-3880 O-Type Closed Barrel Die. The PK-2035M-WD and PK-2035M add the MT-5705 Solar MPPT Power Meter and SB-6011 Utility Component Storage Box, combining installation tools, power testing, and organized storage in one kit. The series is ideal for professionals working on rooftops, solar farms, and other PV installation sites.
Key Features
• Four configurations available: PK-2035-WD, PK-2035, PK-2035M-WD, and PK-2035M
• Integrates tools for cable cutting, stripping, terminal crimping, connector assembly and disassembly, and fastener tightening
• CP-388 features parallel jaw closing action for uniform crimping pressure
• CP-388 crimping range: 8–14 AWG / 2.5–10 mm²
• CP-388 is compatible with MC4 and MC4-Evo2 contacts
• 9CP-3880 O-Type Closed Barrel Die is included with the PK-2035 and PK-2035M
• CP-248 Solar Automatic Cable Stripper: 8–14 AWG / 2.5–10 mm²
• CP-248 features a sharp SK5 steel blade for clean stripping with reduced risk of conductor damage
• SR-V206 VDE 1000V Insulated Cable Cutter: 150 mm / maximum cutting capacity 22 mm²
• SD-810-P2 VDE 1000V Insulated Phillips Screwdriver: PH2, Ø6.0 × 100 mm
• 9HW-S5P02 Solar Connector Wrench Set for assembling and disassembling commonly used PV connectors
• HW-122M Folding Type Hex Key Set: eight metric sizes ranging from 1.5 to 8 mm
• MT-5705 measures up to 2,000 W, 150 V DC, and 45 A
• MT-5705 displays five key parameters: Pmax, Vmp, Imp, Voc, and Isc
• MT-5705 supports AUTO and MANUAL test modes
• SB-6011 features removable dividers for flexible compartment organization
• SB-6011 dimensions: 225 × 180 × 40 mm
Model Selection
• PK-2035-WD: Basic tool configuration without the 9CP-3880 die, MT-5705, or SB-6011
• PK-2035: Basic tool configuration plus the 9CP-3880 O-Type Closed Barrel Die
• PK-2035M-WD: Basic tool configuration plus the MT-5705 Power Meter and SB-6011 Storage Box; 9CP-3880 die not included
• PK-2035M: Complete configuration including the 9CP-3880 die, MT-5705 Power Meter, and SB-6011 Storage Box
Get Solar Installation Right: Pro’sKit Solar Tool Guide
What tools do you need for solar panel installation? Beyond mounting the panels, installers also need to cut and strip cables, crimp terminals, assemble connectors, and test power output. Using dedicated solar tools can make installation faster while reducing the risk of damaged conductors, loose terminals, and abnormal output.
Pro’sKit offers solar tools covering the entire workflow, from cable preparation to final testing. A recommended process is:
Pre-Installation Testing → Cable Cutting & Stripping → Terminal Crimping → Connector Assembly → Final Inspection
CP-248 Solar Automatic Cable Stripper: Fast, Clean Stripping Without Damaging Conductors
The CP-248 is designed for 8–14 AWG / 2.5–10 mm² solar cables. Its sharp SK5 steel blades provide clean stripping while helping reduce the risk of damaging the conductors.
It is ideal for use after cutting the cable and before terminal crimping, especially on jobsites where multiple solar cables need to be prepared efficiently.
CP-388 Pro Solar Panel Crimper: Secure, Consistent MC4 Crimping
The CP-388 supports 8–14 AWG / 2.5–10 mm² cables and is compatible with MC4 and MC4-Evo2 terminals.
Its parallel crimping jaws apply even pressure to the terminal, while the ratchet and high-leverage design make it suitable for repetitive crimping tasks. After crimping, always check that the terminal is secure before inserting it into the connector housing.
MT-5705 Solar MPPT Power Meter: Five Key Measurements at a Glance
The MT-5705 supports measurements up to 2000W, 150V DC, and 45A, and simultaneously displays five key parameters: Pmax, Vmp, Imp, Voc, and Isc.
It is suitable for pre-installation panel checks, final inspection, routine maintenance, and troubleshooting. Standard accessories include MC4 and alligator clip test leads for different testing applications.
PK-2035 Pro Solar Panel MC4 Crimping Tool Kit: Essential Installation Tools in One Case
The PK-2035 brings together the essential tools needed for solar cable cutting, stripping, terminal crimping, connector assembly, removal, and tightening—all organized in a convenient tool case.
It is ideal for technicians who regularly move between rooftops, solar farms, and installation sites, helping reduce the chance of leaving essential tools behind and saving time on jobsite organization.
Pair the PK-2035 with the MT-5705 to cover the complete workflow from cable preparation to power testing.
Recommended Solar Installation Workflow
- Use the MT-5705 to check the solar panel before installation.
- Strip the solar cable with the CP-248.
- Crimp the MC4 terminal with the CP-388.
- Assemble the connector and complete the cable connection.
- Use the MT-5705 again for final testing.
- Keep frequently used installation tools organized and ready to go with the PK-2035.
The Right Tools for Every Step
Quality solar installation comes down to the details. The CP-248 provides clean, precise stripping, the CP-388 delivers secure crimping, the MT-5705 helps verify power output, and the PK-2035 keeps essential tools together in one convenient kit.
Strip it clean. Crimp it secure. Test it with confidence. Make every solar installation more efficient with Pro’sKit.