What is the SS-510, and what is it primarily used for?

The SS-510 is a 100 W handheld mini solder pot with a heat-resistant plastic handle, copper-alloy heat-transfer core, and stainless-steel pot. Its small capacity of approximately 5 mL is suitable for tinning small quantities of wire ends, and the stated solder-melting time is approximately 6 minutes.

Which users or work situations is the SS-510 suitable for?

It is suitable for tinning wire ends, electronic repair, small-batch processing, and field work. Compared with a larger desktop solder pot, it is more compact and heats less solder, but it is not intended for high-volume continuous production or large workpieces.

What are the features and benefits of the SS-510's 100 W heating and approximately 6-minute melting time?

The 100 W heater and small pot can melt a small amount of solder relatively quickly; official information states approximately 6 minutes. Actual time depends on solder quantity, alloy, environment, and power supply.

What are the features and benefits of the SS-510's 5 mL solder pot?

The small capacity is suitable for wire ends and small components while reducing solder consumption and workbench space. Confirm that the workpiece can enter safely and do not force an oversized part into the pot.

What are the key points for the copper-alloy heat-transfer core and stainless-steel pot on the SS-510?

The copper-alloy core transfers heat to the pot, and the stainless-steel pot contains the molten solder. Avoid scratching the pot with sharp tools and do not add unknown or corrosive materials.

How should wire ends be dip-tinned correctly with the SS-510?

Strip, arrange, and apply an appropriate amount of flux to the wire. After the solder has melted completely, dip the wire vertically for a short time and withdraw it smoothly. Excessive immersion can cause insulation to shrink back or solder to wick too far along the conductor.

How should solder and flux be selected or matched for the SS-510?

Use suitable leaded or lead-free solder according to the process, but do not mix different alloys without control. The flux must be compatible with the wire and solder, and its quantity should be limited to reduce residue and fumes.

What handheld high-temperature safety precautions apply when using the SS-510?

Touch only the heat-resistant handle. Treat the pot and front section as high-temperature areas, and do not tilt, shake, or use the tool while walking. Ventilate the work area and wear safety glasses to protect against molten-solder splashes.

How should solder dross be removed and the SS-510 maintained?

Remove surface oxide dross as needed during operation and allow the unit to cool naturally after shutdown. Do not cool it directly with water or wash energized parts. Stop using the tool if the power cord or switch is damaged.

What should I consider when choosing the B, E, or H voltage version of the SS-510?

The SS-510E is the 110-120 V version, while the SS-510B and SS-510H are 220-240 V versions differentiated by regional plug type. Confirm the complete model number and power-supply conditions before purchase.

Mini Solder Pot | E Type-Plug | AC110V~120V

New

SS-510E

Global
Taiwan
China

Mini Solder Pot | E Type-Plug | AC110V~120V

Name: Mini Solder Pot | E Type-Plug | AC110V~120V
Brand: Pro'sKit
SKU: SS-510E

Sturdy & Durable
Heat-resistant handles for strength and stability
Copper alloy core for fast heat transfer
Stainless steel pot — corrosion-resistant, long lifespan

High Power
100W Powerful Output, Melts Solder in 6 Minutes
5mL Capacity – Less Waste

Safe & Easy Control
Built-in power switch for convenient operation

Please contact sales team for more information. Tel. +886-2-2218-3233

I would like to make a query

Features
Videos
FAQ
Dealer
Support

What is the SS-510, and what is it primarily used for?

The SS-510 is a 100 W handheld mini solder pot with a heat-resistant plastic handle, copper-alloy heat-transfer core, and stainless-steel pot. Its small capacity of approximately 5 mL is suitable for tinning small quantities of wire ends, and the stated solder-melting time is approximately 6 minutes.
Which users or work situations is the SS-510 suitable for?

It is suitable for tinning wire ends, electronic repair, small-batch processing, and field work. Compared with a larger desktop solder pot, it is more compact and heats less solder, but it is not intended for high-volume continuous production or large workpieces.
What are the features and benefits of the SS-510's 100 W heating and approximately 6-minute melting time?

The 100 W heater and small pot can melt a small amount of solder relatively quickly; official information states approximately 6 minutes. Actual time depends on solder quantity, alloy, environment, and power supply.
What are the features and benefits of the SS-510's 5 mL solder pot?

The small capacity is suitable for wire ends and small components while reducing solder consumption and workbench space. Confirm that the workpiece can enter safely and do not force an oversized part into the pot.
What are the key points for the copper-alloy heat-transfer core and stainless-steel pot on the SS-510?

The copper-alloy core transfers heat to the pot, and the stainless-steel pot contains the molten solder. Avoid scratching the pot with sharp tools and do not add unknown or corrosive materials.
How should wire ends be dip-tinned correctly with the SS-510?

Strip, arrange, and apply an appropriate amount of flux to the wire. After the solder has melted completely, dip the wire vertically for a short time and withdraw it smoothly. Excessive immersion can cause insulation to shrink back or solder to wick too far along the conductor.
How should solder and flux be selected or matched for the SS-510?

Use suitable leaded or lead-free solder according to the process, but do not mix different alloys without control. The flux must be compatible with the wire and solder, and its quantity should be limited to reduce residue and fumes.
What handheld high-temperature safety precautions apply when using the SS-510?

Touch only the heat-resistant handle. Treat the pot and front section as high-temperature areas, and do not tilt, shake, or use the tool while walking. Ventilate the work area and wear safety glasses to protect against molten-solder splashes.
How should solder dross be removed and the SS-510 maintained?

Remove surface oxide dross as needed during operation and allow the unit to cool naturally after shutdown. Do not cool it directly with water or wash energized parts. Stop using the tool if the power cord or switch is damaged.
What should I consider when choosing the B, E, or H voltage version of the SS-510?

The SS-510E is the 110-120 V version, while the SS-510B and SS-510H are 220-240 V versions differentiated by regional plug type. Confirm the complete model number and power-supply conditions before purchase.

Shipping Instructions

Ship From	SH
Packing	Cardboard Box+Color Label
CTN	25
N.W.	10 Kg
G.W.	11 Kg
CUFT	1.35
M³	0.04
MOQ	300