What is the SS-598, and what is it primarily used for?

The SS-598 is a 24 W desktop solder-fume purifier with multilayer filter media and a brushless motor. It captures soldering smoke and odors close to the source. Digital airflow has 10 settings, with a stated maximum airflow of 160 L/min.

Which users or work situations is the SS-598 suitable for?

It is suitable for electronic soldering, models, wire tinning, repair training, and small workbenches. It helps reduce solder-fume accumulation near the operator's face but must be used with room ventilation and cannot replace a complete exhaust system.

What are the features and benefits of the SS-598's multilayer filtration structure?

The multiple filter layers progressively capture solder-smoke particles and reduce some odors and contaminants. Filters are consumable items; continuing to use saturated media can reduce both adsorption efficiency and airflow.

What are the features and benefits of the SS-598's 10 airflow settings and 160 L/min airflow?

The 10 settings allow airflow to be adjusted for the soldering volume, distance, and noise requirements. Use a higher setting for heavier fumes and a lower setting for typical precision soldering. Capture is generally more effective when the inlet is closer to the source.

What are the key points for using the SS-598's 24 W brushless motor?

The brushless motor is suitable for extended operation and helps reduce mechanical wear. Keep the inlet and outlet unobstructed and prevent tools, paper, or components from restricting airflow.

How should the SS-598 be positioned and oriented correctly?

Aim the inlet toward the joint and place it near the rising fume path rather than drawing air from behind the operator's breathing zone. Start at a higher setting to observe airflow direction, then reduce it to the lowest setting that captures fumes reliably.

What are the key points for replacement filters and consumables for the SS-598?

Use filter media specified for the SS-598 and determine replacement intervals from usage frequency, fume volume, odor, and airflow changes. Do not omit filter layers, and do not wash and reuse disposable activated-carbon or high-efficiency media.

What solder-fume and indoor-safety precautions apply when using the SS-598?

The purifier only reduces local exposure to solder fumes. Keep the work area ventilated and avoid soldering materials with unknown coatings or toxic content. High-volume or continuous industrial soldering requires a more complete local exhaust system.

How should the SS-598 housing and filters be maintained?

Switch off and unplug the unit before wiping dust from the housing and inlet. Regularly inspect filter color, odor, and airflow. Stop using the unit and have it inspected if abnormal noise, overheating, or motor failure occurs.

For the SS-598 series, what should I consider when choosing between the SS-598A and SS-598F?

The A/F suffix distinguishes electrical or regional versions, while the core purification function is similar. Confirm the complete model number, input rating, plug, and local power supply, and check that replacement filters are readily available.

Compact Desktop Smoke Absorber 24W | AC 100-240V | A Type-Plug

New

SS-598A

Global
Taiwan
China

Compact Desktop Smoke Absorber 24W | AC 100-240V | A Type-Plug

Name: Compact Desktop Smoke Absorber 24W | AC 100-240V | A Type-Plug
Brand: Pro'sKit
SKU: SS-598A

A high-performance smoke purification solution purpose-built for soldering, repair, and precision workstations.

• Multi-layer filtration system for fast purification of soldering smoke and harmful gases.
• 24W brushless motor with 10-level digital airflow control.
• High-speed vortex airflow design delivers strong suction with a maximum airflow of 160 L/min.

精密焊接維修站

I would like to make a query

Features
Videos
FAQ
Downloads
Dealer
Support

What is the SS-598, and what is it primarily used for?

The SS-598 is a 24 W desktop solder-fume purifier with multilayer filter media and a brushless motor. It captures soldering smoke and odors close to the source. Digital airflow has 10 settings, with a stated maximum airflow of 160 L/min.
Which users or work situations is the SS-598 suitable for?

It is suitable for electronic soldering, models, wire tinning, repair training, and small workbenches. It helps reduce solder-fume accumulation near the operator's face but must be used with room ventilation and cannot replace a complete exhaust system.
What are the features and benefits of the SS-598's multilayer filtration structure?

The multiple filter layers progressively capture solder-smoke particles and reduce some odors and contaminants. Filters are consumable items; continuing to use saturated media can reduce both adsorption efficiency and airflow.
What are the features and benefits of the SS-598's 10 airflow settings and 160 L/min airflow?

The 10 settings allow airflow to be adjusted for the soldering volume, distance, and noise requirements. Use a higher setting for heavier fumes and a lower setting for typical precision soldering. Capture is generally more effective when the inlet is closer to the source.
What are the key points for using the SS-598's 24 W brushless motor?

The brushless motor is suitable for extended operation and helps reduce mechanical wear. Keep the inlet and outlet unobstructed and prevent tools, paper, or components from restricting airflow.
How should the SS-598 be positioned and oriented correctly?

Aim the inlet toward the joint and place it near the rising fume path rather than drawing air from behind the operator's breathing zone. Start at a higher setting to observe airflow direction, then reduce it to the lowest setting that captures fumes reliably.
What are the key points for replacement filters and consumables for the SS-598?

Use filter media specified for the SS-598 and determine replacement intervals from usage frequency, fume volume, odor, and airflow changes. Do not omit filter layers, and do not wash and reuse disposable activated-carbon or high-efficiency media.
What solder-fume and indoor-safety precautions apply when using the SS-598?

The purifier only reduces local exposure to solder fumes. Keep the work area ventilated and avoid soldering materials with unknown coatings or toxic content. High-volume or continuous industrial soldering requires a more complete local exhaust system.
How should the SS-598 housing and filters be maintained?

Switch off and unplug the unit before wiping dust from the housing and inlet. Regularly inspect filter color, odor, and airflow. Stop using the unit and have it inspected if abnormal noise, overheating, or motor failure occurs.
For the SS-598 series, what should I consider when choosing between the SS-598A and SS-598F?

The A/F suffix distinguishes electrical or regional versions, while the core purification function is similar. Confirm the complete model number, input rating, plug, and local power supply, and check that replacement filters are readily available.

SS_598.pdf (Multi Language)	Manual	Download

Shipping Instructions

Ship From	SH
Packing	Cardboard Box+Color Label
CTN	4
N.W.	4.5 Kg
G.W.	5 Kg
CUFT	0.9
M³	0.03
MOQ	60