What is the TE-6305N, and what are its main output specifications?

The TE-6305N is an adjustable regulated DC power supply with one continuously adjustable output from 0-30 V and 0-5 A. It is suitable for electronic repair, research and development, school laboratories, product testing, and powering small DC devices.

What is the difference between the coarse and fine adjustments on the TE-6305N?

Voltage coarse adjustment changes in 1 V steps and fine adjustment in 10 mV steps. Current coarse adjustment changes in 100 mA steps and fine adjustment in 1 mA steps. Use the coarse control to approach the target quickly, then complete the setting with the fine control.

What do the CV and CC modes on the TE-6305N mean?

CV is constant-voltage mode, in which the output maintains the set voltage. When load current reaches the set limit, the supply enters CC, or constant-current, mode and reduces the voltage. Set a suitable current limit before use to protect the circuit under test.

How should I set the TE-6305N when powering a circuit for the first time?

With the output switched off, set the required voltage and a safe current limit. Confirm the positive and negative polarity and all wiring, then switch on OUTPUT. Start with a lower current limit and observe the device for abnormal current draw or heating.

What can the 5 V/2.4 A USB port on the TE-6305N be used for?

The USB port can power mobile phones, tablets, and other 5 V USB devices, making it convenient at a workbench. It is separate from the main adjustable output and must not be treated as an adjustable-voltage port. Confirm that the device's current requirement is within the port's capacity.

What protection functions does the TE-6305N provide?

It provides short-circuit, overtemperature, and overload protection to reduce the risk of equipment damage under abnormal conditions. These protections are not a reason to perform repeated short-circuit tests. If a warning occurs, switch off the output immediately and identify the wiring or load problem.

Can the TE-6305N continuously output 5 A at 30 V?

The rated single-output range is 0-30 V and 0-5 A, but maximum power and heat dissipation still depend on the manual and operating conditions. During prolonged operation at high voltage and current, maintain ventilation and ensure that the load and conductors have suitable ratings.

How can I avoid reverse polarity when using the TE-6305N?

With the output switched off, confirm the red positive and black negative terminals against the device markings and verify with a multimeter if necessary. Reversed polarity can immediately damage an unprotected circuit, so connect everything before switching on the output.

What should I do if the TE-6305N enters CC mode as soon as the output is enabled?

This indicates that the load is attempting to draw the set current limit. Possible causes include a current limit that is too low, high startup current, a wiring short circuit, or a faulty device. Switch off the output, check resistance and wiring, and then increase the current limit gradually if appropriate.

What is the difference between the TE-6305NE, TE-6305NB, and TE-6305NH?

All three versions have the same main output functions and support AC 104-253 V, 50/60 Hz input. They are mainly differentiated by the E, B, and H plug types and target markets. Select a plug version that can be used safely in the local market.

DC Power Supply | AC 104-253V | E Type-Plug

New

TE-6305NE

Global
Taiwan

DC Power Supply | AC 104-253V | E Type-Plug

Name: DC Power Supply | AC 104-253V | E Type-Plug
Brand: Pro'sKit
SKU: TE-6305NE

The TE-6305N adjustable DC regulated power supply adopts advanced microcontroller technology combined with a high-quality encoder control system, delivering stable and continuously adjustable DC output for both voltage and current.

It supports precise regulation through dual-level coarse and fine adjustment, allowing users to quickly switch between wide-range tuning and high-resolution control. A built-in 5V / 2.4A USB output provides convenient power for smartphones, tablets, and other USB-powered devices, improving workspace efficiency.

Designed with comprehensive protection features and a high-quality SMD manufacturing process, the TE-6305N ensures reliable performance for laboratory, educational, and professional applications.

Key Features
• Single Output: 0–30V / 0–5A
• Dual-Level Voltage Control:
• Coarse adjustment: 1V steps
• Fine adjustment: 10mV steps
• Dual-Level Current Control:
• Coarse adjustment: 100mA steps
• Fine adjustment: 1mA steps
• Encoder-based adjustment for smooth and accurate control
• Built-in USB Output: 5V / 2.4A for mobile devices
• Protection Functions: short-circuit, over-temperature, and overload protection
• High-quality SMD process for enhanced stability and reliability

精密焊接維修站

I would like to make a query

Features
Videos
FAQ
Downloads
Dealer
Support

What is the TE-6305N, and what are its main output specifications?

The TE-6305N is an adjustable regulated DC power supply with one continuously adjustable output from 0-30 V and 0-5 A. It is suitable for electronic repair, research and development, school laboratories, product testing, and powering small DC devices.
What is the difference between the coarse and fine adjustments on the TE-6305N?

Voltage coarse adjustment changes in 1 V steps and fine adjustment in 10 mV steps. Current coarse adjustment changes in 100 mA steps and fine adjustment in 1 mA steps. Use the coarse control to approach the target quickly, then complete the setting with the fine control.
What do the CV and CC modes on the TE-6305N mean?

CV is constant-voltage mode, in which the output maintains the set voltage. When load current reaches the set limit, the supply enters CC, or constant-current, mode and reduces the voltage. Set a suitable current limit before use to protect the circuit under test.
How should I set the TE-6305N when powering a circuit for the first time?

With the output switched off, set the required voltage and a safe current limit. Confirm the positive and negative polarity and all wiring, then switch on OUTPUT. Start with a lower current limit and observe the device for abnormal current draw or heating.
What can the 5 V/2.4 A USB port on the TE-6305N be used for?

The USB port can power mobile phones, tablets, and other 5 V USB devices, making it convenient at a workbench. It is separate from the main adjustable output and must not be treated as an adjustable-voltage port. Confirm that the device's current requirement is within the port's capacity.
What protection functions does the TE-6305N provide?

It provides short-circuit, overtemperature, and overload protection to reduce the risk of equipment damage under abnormal conditions. These protections are not a reason to perform repeated short-circuit tests. If a warning occurs, switch off the output immediately and identify the wiring or load problem.
Can the TE-6305N continuously output 5 A at 30 V?

The rated single-output range is 0-30 V and 0-5 A, but maximum power and heat dissipation still depend on the manual and operating conditions. During prolonged operation at high voltage and current, maintain ventilation and ensure that the load and conductors have suitable ratings.
How can I avoid reverse polarity when using the TE-6305N?

With the output switched off, confirm the red positive and black negative terminals against the device markings and verify with a multimeter if necessary. Reversed polarity can immediately damage an unprotected circuit, so connect everything before switching on the output.
What should I do if the TE-6305N enters CC mode as soon as the output is enabled?

This indicates that the load is attempting to draw the set current limit. Possible causes include a current limit that is too low, high startup current, a wiring short circuit, or a faulty device. Switch off the output, check resistance and wiring, and then increase the current limit gradually if appropriate.
What is the difference between the TE-6305NE, TE-6305NB, and TE-6305NH?

All three versions have the same main output functions and support AC 104-253 V, 50/60 Hz input. They are mainly differentiated by the E, B, and H plug types and target markets. Select a plug version that can be used safely in the local market.

TE_6305N_manual.pdf (Multi Language)	Manual	Download

Shipping Instructions

Ship From	SH
Packing	Cardboard Box
CTN	12
N.W.	13.5 Kg
G.W.	14.5 Kg
CUFT	2.25
M³	0.06
MOQ	300