What is the MT-1217, and what is it mainly used for?

A multifunction auto-ranging digital multimeter rated CAT III 1000 V, with a 5,999-count maximum display and AC true RMS measurement.

Who is the MT-1217 suitable for, and in what work situations?

The MT-1217 is suitable for power systems, electrical distribution, electrical and HVAC work, solar installations, equipment maintenance, and professionals who require a higher safety category and comprehensive measurement functions. Always operate it according to the product manual, site conditions, and applicable work procedures.

What are the features or benefits of the MT-1217's CAT III 1000 V rating, overload protection, and resettable fuse protection?

The CAT III 1000 V rating, overload protection, and resettable fuse protection improve protection when the meter is used in distribution systems and other high-energy environments, but all rated limits must still be observed. Correct settings and the specified operating range must also be followed; results should not be judged from a single function alone.

What are the features or benefits of the MT-1217's true RMS, relative value, backlight, and comprehensive measurement functions?

True RMS, relative value, backlight, and comprehensive measurement functions support distorted AC waveforms and measurements or tests including capacitance, frequency, temperature, NCV, and transistors. This design is primarily intended to improve operating efficiency, stability, and ease of on-site interpretation.

What is the correct basic operating procedure for the MT-1217?

Before measurement, confirm the safety category, rotary-switch function, and test-lead jacks. For an unknown circuit, begin with a higher range or use auto-ranging.

What important specifications or compatibility limitations apply to the MT-1217?

5,999 counts; DC voltage up to 1,000 V; AC voltage up to 750 V; AC/DC current up to 10 A; resistance up to 60 MΩ; capacitance approximately 6 mF; frequency up to 20 MHz; temperature up to 1,000 °C.

What safety precautions should be followed when using the MT-1217?

Do not exceed the rated values. When measuring current, never connect the meter across a voltage source. Disconnect power from the circuit before switching to resistance, capacitance, or temperature measurement.

How should the MT-1217 be cleaned and maintained after use?

Inspect the fuse, battery, test leads, and protective holster. Keep the terminals dry, and verify correct operation after a drop or overload.

How should I choose between the MT-1217 and similar tools?

The MT-1217 is suitable for users who prioritize a CAT III 1000 V rating and multifunction capability. If a higher current range or different meter configuration is required, compare it with the MT-1280.

What should I confirm before purchasing the MT-1217?

Confirm whether the MT-1217 or MT-1217-C regional version is required, and verify that the measurement ranges, temperature probe, and calibration documentation meet the applicable work requirements.

MT-1217

Global
Taiwan

3 5/6 True RMS Digital Multimeter

Name: 3 5/6 True RMS Digital Multimeter
Brand: Pro'sKit
SKU: MT-1217

Auto Range/Frequency/Capacitance/ Temperature/DMM All in 1.
AC True RMS measurement

5G Station Network Computer-Laptop Electronic Production line Enterprise Network Setup Handicraft-Model-Toy Industry Hydropower Industry Phone Repair Student 1KV Electrical_Workshop electrician user High Voltage Meter power plant Solar Meter Substation VDE 推薦儀錶

I would like to make a query

Features
FAQ
Downloads
Dealer
Support

Complies with newest CE safety standard
AC True RMS measurement
3 5/6 digits 5999 counts
Large and easy to read display panel
Overload and resettable fuse protection circuit design
Extra function: Auto range, relative reference, backlight, data hold, auto power off, low battery indication

Model No.	MT-1217
Digits	3 5/6digits, 5999 counts
DCV	600mV/6V /60V/600V±(0.5%+4d) 1000V ±(1%+6d)
ACV	600mV±(1%+10d), 6V /60V/600V±(0.8%+6d), 750V ±(1%+10d), True RMS
DCA	600uA/6000uA/60mA/600mA, ±(1%+10d), 10A±(1.2%+10d)
ACA	600uA/6000uA/60mA/600mA, ±(1.5%+10d), 10A±(2.5%+15d), True RMS
Frequency response	40Hz~1000Hz
Resistance	600Ω±(0.8%+5d), 6K/60K/600K/6M±(0.8%+4d), 60MΩ ±(1.2%+10d)
Capacitance	9.999nF ±(5 %+35d) 9.999nF~~999.9uF ±(3.5%+8d) 999.9uF~6mF ±(3.5%+35d)
Frequenct	10~20MHz±(1%+10d)
Temperature	-20℃~1000℃, <400˚C±(1.0%+5d) ≥400˚C±(1.5%+15d)
Temperature	-4℉~ 1832℉,< 752℉±(1.0%+5d), ≥ 752℉±(1.5%+15d)
NCV detection	Y
Buzzer	Y
Diode test	Y
Triode test	Y
Hz/% Test	Y
Relative value	Y
Data hold	Y
Auto power off	Y
LED backlight	Y
Safety standard	CE,CAT III 1000V
Power source	9V(6F22*1)

What is the MT-1217, and what is it mainly used for?

A multifunction auto-ranging digital multimeter rated CAT III 1000 V, with a 5,999-count maximum display and AC true RMS measurement.
Who is the MT-1217 suitable for, and in what work situations?

The MT-1217 is suitable for power systems, electrical distribution, electrical and HVAC work, solar installations, equipment maintenance, and professionals who require a higher safety category and comprehensive measurement functions. Always operate it according to the product manual, site conditions, and applicable work procedures.
What are the features or benefits of the MT-1217's CAT III 1000 V rating, overload protection, and resettable fuse protection?

The CAT III 1000 V rating, overload protection, and resettable fuse protection improve protection when the meter is used in distribution systems and other high-energy environments, but all rated limits must still be observed. Correct settings and the specified operating range must also be followed; results should not be judged from a single function alone.
What are the features or benefits of the MT-1217's true RMS, relative value, backlight, and comprehensive measurement functions?

True RMS, relative value, backlight, and comprehensive measurement functions support distorted AC waveforms and measurements or tests including capacitance, frequency, temperature, NCV, and transistors. This design is primarily intended to improve operating efficiency, stability, and ease of on-site interpretation.
What is the correct basic operating procedure for the MT-1217?

Before measurement, confirm the safety category, rotary-switch function, and test-lead jacks. For an unknown circuit, begin with a higher range or use auto-ranging.
What important specifications or compatibility limitations apply to the MT-1217?

5,999 counts; DC voltage up to 1,000 V; AC voltage up to 750 V; AC/DC current up to 10 A; resistance up to 60 MΩ; capacitance approximately 6 mF; frequency up to 20 MHz; temperature up to 1,000 °C.
What safety precautions should be followed when using the MT-1217?

Do not exceed the rated values. When measuring current, never connect the meter across a voltage source. Disconnect power from the circuit before switching to resistance, capacitance, or temperature measurement.
How should the MT-1217 be cleaned and maintained after use?

Inspect the fuse, battery, test leads, and protective holster. Keep the terminals dry, and verify correct operation after a drop or overload.
How should I choose between the MT-1217 and similar tools?

The MT-1217 is suitable for users who prioritize a CAT III 1000 V rating and multifunction capability. If a higher current range or different meter configuration is required, compare it with the MT-1280.
What should I confirm before purchasing the MT-1217?

Confirm whether the MT-1217 or MT-1217-C regional version is required, and verify that the measurement ranges, temperature probe, and calibration documentation meet the applicable work requirements.

MT_1217_MANUAL.pdf (Multi Language)	Manual	Download

Shipping Instructions

Ship From	SH
Packing	Color Box
CTN	30
N.W.	15.85 Kg
G.W.	16.85 Kg
CUFT	2.33
M³	0.07
MOQ	30