●Strong Anti-Noise Availability ●PoE Switches & STP Wire Tracing up to 3KM ●Telephone Line Status/Polarity Indication ●Cable Mapping & Status Indication up to 300M
With EMI filters to eliminate high frequency noise allows you to track wire easily and quickly
Telephone Line Status/Polarity Indication
Identify the telephone line polarity easily and detect status such as severed lines, off-hook condition, or incoming call ringing
PoE Switches & STP Wire Tracing up to 3KM
Ideal for tracking live Ethernet cables as well as STP cable and determining continuity of network
Cable Mapping & Status Indication up to 300M
Fast/Slow scan function.
Display the result of pin to pin cable mapping
Display cable status and troubleshoot wiring
for continuity, shorts, opens and crossover
Non- Contact Voltage Detecting
MT-7029 Transmitter specifications
Tone frequency
130KHz
Max. distance of transmission& cable map
3km&300m
Tone mode
Single tone
Compatible connectors
for RJ45(8 pin)/RJ11(6 pin) cable map
test socket/RJ45 SCAN socket : for RJ45 locating Individual wire pairs/
RJ11 SCAN socket: for RJ11 locating Individual wire pairs
Cable types tested
RJ45 Lan cable Cat 5,5e,6(UTP/ STP),
RJ11/12 Telephone cable (6P/2C/4C/6C)
Continuity test
1 LED (≦300Ω), Coaxial cable & normal solid/
Stranded wire by alligator clips patch cord.
Cable map & shielded indication
8 LEDs Fast/slow dual speed, 1 LED
Phone line polarity indication
1 Dual color LED
Telephone line status indication
1 Dual color LED
Network scan & PoE scan
1 LED&1 LED
EMI filter(network scan & PoE scan)
YES
Other function
Live telecommunication equipment test and router test,
voltage protection DC 48V, auto power off, low battery display
Battery type
DC 9V (NEDA 1604/6F22) x1 pcs (not included)
Dimension (L×W×D)
138×80×35 mm
MT-7029 Receiver specifications
Frequency
130KHz
Compatible connectors
RJ45(8 pin)/RJ11(6 pin)
Signal status indication
1 dual color LED & buzzer, building ear jack
Cable map& shielded indication
8 LEDs&1 LED
NCV indication
1 LED (AC90~1000V)
LED illumination
1 LED
Battery type
9V DC (NEDA 1604/6F22) x1 pc (not included)
Dimension (L×W×D)
203×50×32 mm
Accessories
RJ45 cable patch cords、RJ11 cable patch cords、RJ11 to alligator clips patch cord,earphone, storage bag, user manual
The signal from Transmitter can not be detected by receiver
1. Shortage of battery power: Check the battery on both Transmitter and receiver. If the battery voltage is less than 7.0V, please replace new battery.
2. Make sure the switch position on receiver is “SCAN” or “LED”. The SCAN function will not work if the switch is at “NCV” position.
3. Device damaged: please return the product to the place you purchased the product for maintenance
No signal received from Transmitter on Live telecommunication device testing
There might be conflict between the signal from telephone office and the signal from Transmitter. Please turn off the telephone exchange device.
Incorrect cable mapping result
1. LCD display broken: please return the product to the place you purchased the product for maintenance.
2. Improper connection of networking or telephone cables: please reconnect the cables to RJ45 or RJ11 individual jacks
NCV NOT WORK
Switch at SCAN position, and push “SCAN ” button; If the indicator did not light up, please replace with a new battery