Mini Soldering Iron Stand

The SN-006 is a portable screw-cap soldering-iron stand approximately 60 mm in diameter. It unfolds to support an iron during use and closes by tightening the top cover for storage. A silicone seal and enclosed structure reduce leakage from the damp sponge and provide an IP67 protection design.

It is suitable for field repair, carrying in a toolbox, training, and soldering where bench space is limited. When transporting an iron and cleaning sponge, sealed storage helps keep the toolbox cleaner than an open soldering-iron stand.

Unscrewing the top cover forms the soldering-iron stand; after work, it folds back and locks closed to reduce storage size. Allow the stand and sponge to cool before storage. Never seal a hot soldering iron inside it.

The seal helps reduce water leakage and retain moisture in the sponge, while the IP67 design improves dust and water protection during transport. The rating does not mean the product should be immersed for an extended period or exposed to water while electrically energized equipment is present.

The non-slip base increases friction with the work surface and reduces movement when the iron is placed in the stand. Confirm that the surface is level and dry and prevent cable tension from tipping the stand.

Keep the sponge only slightly damp, without standing water. Excess moisture cools the soldering tip too quickly and may increase thermal shock. Re-tin the tip lightly after cleaning to maintain its surface.

The SN-006 fits general portable soldering irons, but stability must be checked for each handle and heating-tube size. Use a larger desktop stand for a heavier iron or one with substantial cable pull.

Do not screw on the cover while the iron is operating, and never place a hot iron directly into a toolbox. After work, disconnect power, allow all parts to cool, remove excess water, and then close the stand securely.

Regularly clean the sponge and remove solder debris from the interior. Wipe the silicone seal and inspect it for cracking, deformation, or detachment. If the seal fails or the stand becomes loose, replace or repair the affected parts before transport.

Choose the SN-006 when compact size, sealing, and field portability are priorities. For extended fixed-bench work, heavier irons, or greater stability, a desktop metal stand is generally more suitable.