SMD Rework Station AC 110~120V 700W

1. Check if the unit is switched ON.

2. Check the fuse, replace with the same type of fuse if blown.

3. Check the power cord and make sure there is no disconnection.

4. Verify that the unit is properly connected to the power source.

5. Check if local voltage matches the product requirement.

Heat gun cord or heating element may be damaged, please replace a new heat gun

• Heat gun plug may be loose from the receptacle, unplug the heat gun and re-attach
• Heat gun cord or heating element may be damaged, please replace new heat gun.

• Heat gun plug may be loose from the receptacle, unplug the heat gun and re-attach
• Heat gun cord or heating element may be damaged, please replace new heat gun.