Why don't solar powered toys move in the sun?
1. Please check whether the wires of the solar panel module are properly connected to the motor and motor according to the instructions.
2. Please confirm whether the location is sunny or not
3. Refer to the instruction manual to check that the solar panel wires do not overlap each other or connect with each other in a short circuit. If the short circuit is prone to high heat, the contact points will be melted.
Toys not running smoothly?
Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.
Parts are missing or the part board is broken or broken during disassembly and assembly
You can contact our online customer service for supplementary matters
GE-615 It has been confirmed that the sunlight energy is sufficient, but the toy still does not start?
1.Please follow the instructions to check if the gears in the gear set are in the correct order or if the burrs on your C5 gears are not cleaned.
2.Check that the motor wires are properly inserted into the solar panel.
GE-615 What to do when a part gets stuck?
Reference Manual P.12 Use the auxiliary tools in the example to solve
Disassembly and storage teaching of multi-combination change mode
1. Disassemble according to the reverse steps of the manual
2. The registration number of the separated parts, so as not to worry about changing the parts next time
3. After the disassembly is completed, another change can be assembled
GE-615 Robot turtle can't move and buzzing?
Refer to the instruction manual P.15 Whether the gear frame under the motor box is assembled correctly or is too loose
GE-615Car won't move?
Refer to the instruction manual P.47-P.48 whether the gear shaft bracket is assembled correctly or is too loose