Why don't solar powered toys move in the sun?
1. Please check whether the wires of the solar panel module are properly connected to the motor and motor according to the instructions.
2. Please confirm whether the location is sunny or not
3. Refer to the instruction manual to check that the solar panel wires do not overlap each other or connect with each other in a short circuit. If the short circuit is prone to high heat, the contact points will be melted.
Toys not running smoothly?
Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.
Parts are missing or the part board is broken or broken during disassembly and assembly
You can contact our online customer service for supplementary matters
Disassembly and storage teaching of multi-combination change mode
1. Disassemble according to the reverse steps of the manual
2. The registration number of the separated parts, so as not to worry about changing the parts next time
3. After the disassembly is completed, another change can be assembled
GE-617 It has been confirmed that the sun is sufficient, but still unable to move, and there is abnormal sound?
Check whether the yellow gear P3 on page 7 of the manual is installed correctly
GE-617 Why did I assemble the drilling rig and the Tyrannosaurus two different speeds under the sun?
The operation of the drilling rig is that the wheels rotate in parallel, and the resistance is small.
Tyrannosaurus runs vertically as the axis drives the feet, and the resistance is relatively large.