Why don't solar powered toys move in the sun?
1. Please check whether the wires of the solar panel module are properly connected to the motor and motor according to the instructions.
2. Please confirm whether the location is sunny or not
3. Refer to the instruction manual to check that the solar panel wires do not overlap each other or connect with each other in a short circuit. If the short circuit is prone to high heat, the contact points will be melted.
Toys not running smoothly?
Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.
Parts are missing or the part board is broken or broken during disassembly and assembly
You can contact our online customer service for supplementary matters
GE-619 It has been determined that the sun's energy is sufficient, the motor is buzzing, but it can't move?
1. Please refer to page 4 of the manual to see if the parts P1 and P2 are assembled correctly
2. Check whether the burrs of the parts are completely cut according to the instructions
Disassembly and storage teaching of multi-combination change mode
1. Disassemble according to the reverse steps of the manual
2. The registration number of the separated parts, so as not to worry about changing the parts next time
3. After the disassembly is completed, another change can be assembled
GE-619 Why assemble the racing car and the drummer, the racing car moves fast and the drum hand is slow?
The kinetic energy required for wheel walking and walking are different, and the energy to start is also different.
The racing car can start from the motor box until the kinetic energy required by the wheels is about 1.2V.
From the motor box, the drummer needs to walk through the hands and drums, and the required kinetic energy needs 1.5V to start.