Please confirm the battery level, whether the battery is installed correctly, and whether the shrapnel is installed backwards. If the shrapnel is not in good contact with the battery, it will not be able to start without power.

Please check whether the order of the gear combinations in the gearbox is wrong or reversed according to the instructions.

Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.

You can contact our online customer service for supplementary matters

Please refer to step 1 of P.9 in the manual to check whether the P12 ultrasonic atomizing sheet is installed correctly
Red wire with notched waterproof ring towards the chimney spout
Black wire with full waterproof ring towards the reservoir
Reverse installation or pressing the internal groove to the top will affect the normal operation of the oscillator

1. Please check whether there are burrs left on the cut parts
2. Please check whether the B13 and B31 parts are installed correctly according to the instruction manual P.16

It may be that the wire was broken when assembling the P12 parts, or the wire connector tore off the wire core
Baogong Kewan's official application for replacement parts website https://reurl.cc/eWGEMj
For the first application, you can resend accessories for free once

The robot type needs to open the arms so as not to interfere with the robot's legs and feet~~

1. Disassemble according to the reverse steps of the manual

2. The registration number of the separated parts, so as not to worry about changing the parts next time

3. After the disassembly is completed, another change can be assembled