What is the SS-989, and what tasks can it perform?

The SS-989 is a 2-in-1 SMD rework station that combines a hot-air gun and a temperature-controlled soldering iron in one main unit. It can be used for hot-air removal and installation of surface-mount components, soldering, and general soldering-iron work. Separate power switches allow each function to be used independently or both to be operated at the same time when required.

What electronic components can the SS-989 repair?

The SS-989 is suitable for desoldering and reworking QFP, SOP, and other surface-mount ICs, connectors, and general circuit-board components. Hot-air temperature and airflow are adjustable, while the soldering iron is suitable for touch-up soldering, removing residual solder, and general solder-joint work. It is suitable for electronics repair, research and development, and teaching environments.

Can the SS-989 hot-air gun and soldering iron be used separately?

Yes. The SS-989 uses separate power switches, so the hot-air gun and temperature-controlled soldering iron can be started independently. During a single-function task, the other function does not need to remain running. When necessary, the two functions can also be used simultaneously by two users or within the same workflow.

What are the temperature ranges of the SS-989 hot-air gun and soldering iron?

The SS-989 has a total power consumption of 700 W, and the soldering iron is rated at 60 W. The soldering-iron temperature range is 200°C to 480°C, while the hot-air range is from room temperature to 480°C. When setting the temperature, consider the component's heat tolerance, solder type, nozzle size, and heating distance.

How quickly does the SS-989 soldering iron heat up?

The SS-989 uses an alumina ceramic heating element. Official information states that it reaches 300°C in approximately 36 seconds, making it suitable for repair situations that require a quick start. Actual heat-up time is affected by ambient temperature, the selected setting, soldering-tip condition, and power conditions.

Can the SS-989 soldering-iron and hot-air temperatures be calibrated?

Yes. The SS-989's microcomputer control and 3-in-1 PC board provide CAL calibration for both the soldering iron and hot air, allowing correction when the actual temperature differs from the displayed value. Use a suitable temperature-measurement instrument and follow the steps in the manual when calibrating.

What are the airflow and operating-noise specifications of the SS-989?

The SS-989 uses a diaphragm air pump with a maximum airflow of approximately 24 L/min. The specified equipment noise level is 45 dB. Adjust airflow according to component size and nozzle. Excessive airflow may move adjacent components, while insufficient airflow can extend heating time and increase localized thermal stress.

Why does the fan continue running after the SS-989 hot-air function is turned off?

This is the automatic cooling procedure. After the hot-air function is turned off, the pump continues supplying air until the nozzle and heating area cool to a safer temperature, reducing thermal damage to the heating element and extending its service life. Do not switch off the main power or unplug the unit before cooling is complete.

Can the SS-989 hot-air nozzles, soldering tips, or heating elements be replaced?

Yes. Both the hot-air gun and soldering iron are serviceable. Hot-air nozzles, soldering tips, and heating elements can be replaced according to specification, and three commonly used round hot-air nozzles are included. When purchasing parts, verify the dimensions, voltage, and original part number to avoid compatibility or safety issues.

What are the differences among the SS-989E, SS-989B, and SS-989H?

The SS-989E is rated for AC 110-120 V, 60 Hz. The SS-989B and SS-989H are rated for AC 220-240 V, 50 Hz and mainly differ by the region of use and plug type. When purchasing or replacing electrical accessories such as a hot-air gun, verify the full model number and voltage version.

SS-989H 2 In 1 SMD Hot Air ReworkStation AC220~240 700W

Name: 2 In 1 SMD Hot Air ReworkStation AC220~240 700W
Brand: Pro'sKit
SKU: SS-989H

Accurate temperature control

Microprocessor temperature controlled
Temperature calibration function
Closed circuit sensor design

Certified international safety standard

Complies with CE and ESD standard, conform to RoHS.
Comes with AWG 20 (0.5mm²) UL Certified Wires.
Silicone handpiece cord wire heat-resistant up to 200oC
Additional ground contact and power cord socket.

High Power, Fast Warm Up & Energy Saving

Alumina Ceramic Soldering iron heating element features high power, fast warm up.
Individual function starts save energy, or share function by 2 users at the same time.
Adjustable temperature and air flow for easy surface or hole mount components QFP, SOP type IC devices rework.

Interchangeable and applicable to most of branded hot air nozzles and tips

3 nozzles included with this rework station.
Interchangeable hot air nozzles design for different type of surface mount components.
Also applicable to most of branded heating element and nozzles.

Auto Cool-Off Process to prolong the service lifetime

After power switch is turned off, the auto cool-off process leaves the blower on until the nozzle is cool.

Specification	SS-989E	SS-989B	SS-989H
Power Consumption	700W
Soldering Power	60W
Soldering Iron Temperature Range	200˚C ~ 480˚C (392˚F ~ 896˚F)
Hot Air Temperature Range	Room temperature ~ 480˚C ( 896˚F)
Soldering Iron Heating Element	Alumina Ceramic
Hot Air Heating Element	Metal Heating Core
Pump/Motor Type	Diaphragm Pump
Air Capacity	24L/min (max)
Equipment noise	45dB
Temperature Display	LED
Power Input	AC 110V~120V 60Hz	AC 220V~240V 50Hz	AC220V~240V 50Hz
Standard Plug
Dimensions	255(L)x190(W)x140(H)mm
Weight	4200 g (w/ hot air gun)
Accessories	Hot Air Gun AC110~120Vx1pcs 9SS-900NE-HG	Hot Air Gun AC220~240Vx1pcs 9SS-900NB-HG	Hot Air Gun AC 220~240Vx1pcs 9SS-900NB-HG
	Soldering Iron (AC 24V/60W) 9SS-900N-SI x 1pcs, Soldering Stand x 1pcs, Nozzle 9SS-900-A1 (Ø2.3mm) x 1pcs, Nozzle 9SS-900-A2 (Ø6.4mm) x 1pcs, Nozzle 9SS-900-A3 (Ø8.8mm) x 1pcs

How to replace heating element of soldering iron for SS-989
How to replace heating element of hot air gun for SS-989
What is the SS-989, and what tasks can it perform?

The SS-989 is a 2-in-1 SMD rework station that combines a hot-air gun and a temperature-controlled soldering iron in one main unit. It can be used for hot-air removal and installation of surface-mount components, soldering, and general soldering-iron work. Separate power switches allow each function to be used independently or both to be operated at the same time when required.
What electronic components can the SS-989 repair?

The SS-989 is suitable for desoldering and reworking QFP, SOP, and other surface-mount ICs, connectors, and general circuit-board components. Hot-air temperature and airflow are adjustable, while the soldering iron is suitable for touch-up soldering, removing residual solder, and general solder-joint work. It is suitable for electronics repair, research and development, and teaching environments.
Can the SS-989 hot-air gun and soldering iron be used separately?

Yes. The SS-989 uses separate power switches, so the hot-air gun and temperature-controlled soldering iron can be started independently. During a single-function task, the other function does not need to remain running. When necessary, the two functions can also be used simultaneously by two users or within the same workflow.
What are the temperature ranges of the SS-989 hot-air gun and soldering iron?

The SS-989 has a total power consumption of 700 W, and the soldering iron is rated at 60 W. The soldering-iron temperature range is 200°C to 480°C, while the hot-air range is from room temperature to 480°C. When setting the temperature, consider the component's heat tolerance, solder type, nozzle size, and heating distance.
How quickly does the SS-989 soldering iron heat up?

The SS-989 uses an alumina ceramic heating element. Official information states that it reaches 300°C in approximately 36 seconds, making it suitable for repair situations that require a quick start. Actual heat-up time is affected by ambient temperature, the selected setting, soldering-tip condition, and power conditions.
Can the SS-989 soldering-iron and hot-air temperatures be calibrated?

Yes. The SS-989's microcomputer control and 3-in-1 PC board provide CAL calibration for both the soldering iron and hot air, allowing correction when the actual temperature differs from the displayed value. Use a suitable temperature-measurement instrument and follow the steps in the manual when calibrating.
What are the airflow and operating-noise specifications of the SS-989?

The SS-989 uses a diaphragm air pump with a maximum airflow of approximately 24 L/min. The specified equipment noise level is 45 dB. Adjust airflow according to component size and nozzle. Excessive airflow may move adjacent components, while insufficient airflow can extend heating time and increase localized thermal stress.
Why does the fan continue running after the SS-989 hot-air function is turned off?

This is the automatic cooling procedure. After the hot-air function is turned off, the pump continues supplying air until the nozzle and heating area cool to a safer temperature, reducing thermal damage to the heating element and extending its service life. Do not switch off the main power or unplug the unit before cooling is complete.
Can the SS-989 hot-air nozzles, soldering tips, or heating elements be replaced?

Yes. Both the hot-air gun and soldering iron are serviceable. Hot-air nozzles, soldering tips, and heating elements can be replaced according to specification, and three commonly used round hot-air nozzles are included. When purchasing parts, verify the dimensions, voltage, and original part number to avoid compatibility or safety issues.
What are the differences among the SS-989E, SS-989B, and SS-989H?

The SS-989E is rated for AC 110-120 V, 60 Hz. The SS-989B and SS-989H are rated for AC 220-240 V, 50 Hz and mainly differ by the region of use and plug type. When purchasing or replacing electrical accessories such as a hot-air gun, verify the full model number and voltage version.

ss_989_userManual.pdf (Multi Language)	Manual	Download

Shipping Instructions

Ship From	SH
Packing	Color Box
CTN	4
N.W.	21.52 Kg
G.W.	22.44 Kg
CUFT	2.68
M³	0.08
MOQ	0

SS-989H

2 In 1 SMD Hot Air ReworkStation AC220~240 700W

How to replace heating element of soldering iron for SS-989

How to replace heating element of hot air gun for SS-989