【Science kit】8-in1 Solar Educational Robot Kit

1. Please check whether the wires of the solar panel module are properly connected to the motor and motor according to the instructions.

2. Please confirm whether the location is sunny or not

3. Refer to the instruction manual to check that the solar panel wires do not overlap each other or connect with each other in a short circuit. If the short circuit is prone to high heat, the contact points will be melted.

Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.

You can contact our online customer service for supplementary matters

1. Please refer to page 4 of the manual to see if the parts P1 and P2 are assembled correctly

2. Check whether the burrs of the parts are completely cut according to the instructions

The kinetic energy required for wheel walking and walking are different, and the energy to start is also different.

The racing car can start from the motor box until the kinetic energy required by the wheels is about 1.2V.

From the motor box, the drummer needs to walk through the hands and drums, and the required kinetic energy needs 1.5V to start.

1. Disassemble according to the reverse steps of the manual

2. The registration number of the separated parts, so as not to worry about changing the parts next time

3. After the disassembly is completed, another change can be assembled